MACHSWON Universal Capillary Thermostat Cooling Radiator, TS-120SR Fan Control Switch Tempeure Controller Adjustable 0-120Β°C Heating/Cooling Universal Capillary Thermostat Cooling Radiator
βΆAllows you set the tempeure you want the cooling fan to opee between 0βο½120β
βΆSuitable for use with any after-market Cooling Fan with 12V
βΆThe Fan will kick in at the selected tempeure and then switch of when the engine tempeure goes back down
$21.49
Specification:
Voltage:12V
Material: Steel and Plastic
Tempeure range: 0βο½120β
Accuracy:4Β±2β
Tempeure bar length:104mm
Tempeure sensing rod diameter:5mm
Capillary length:1000mm
Wiring Instructions
C Terminal = 12v Feed
No2 Terminal= Power out to the fan
(the switch is earthed through the fan)
No1 Terminal= Leave blank, this isn’t required for this application
You can also wire a relay in if you want, but this isn’t a requirement.
Package Included:
1x Switch
βΆAllows you set the tempeure you need the cooling fan to opee between 0βο½120β
βΆSuitable to be used with any after-market Cooling Fan with 12V
βΆThe Fan will kick in at the selected tempeure and then switch of when the engine tempeure goes back down
βΆTo slot in the hose simply the top radiator and fully insert the probe, then re-fit hose and tighten over the capillary wire being extra careful not to damage the probe inside. Silicone sealant can be utilized to help seal if required.
βΆAll of our products are subject to strict quality keep watch over. If there are quality problems or you don’t seem to be satisfied with the products, please contact us. We provide you with the most productive solution.
Specification: MACHSWON Universal Capillary Thermostat Cooling Radiator, TS-120SR Fan Control Switch Tempeure Controller Adjustable 0-120Β°C Heating/Cooling Universal Capillary Thermostat Cooling Radiator
|





There are no reviews yet.