Magnetic Reed Switch NC Surface Mount Wired Door Window Contact Sensor with Adhesive Paper for Home Security and Burglar Alarm Systems MC-38 5pcs
MATERIAL – The switch housing is made of ABS flame retardant material and the reed switch is resistant to high temperature and deformation.
NORMALLY CLOSED(NC) – When the switch is close to the magnet, the circuit is conductive(light on); when the switch is separated from the magnet, the circuit is not conductive(light off).
ACTUATION DISTANCE – 10-20mm transmitting distance. The contact has fast reflection and accurate detection.
$8.99
Differences of NC, NO, NC/NO
Normally Closed(NC): When the switch is with reference to the magnet, the circuit is conductive(light on); when the switch is separated from the magnet, the circuit isn’t conductive(light off).
Normally Opened(NO): When the switch is separated from the magnet, the circuit is conductive(light on); When the switch is with reference to the magnet, the circuit isn’t conductive(light off).
NC/NO Combined: The switch has 3 contact types: NC/NO/COM, you’ll be able to select to connect two of the contacts(NC-COM or NO-COM).
PLEASE NOTE
A magnetic door contact can only provide a switching signal to the device. It can not straight away load the power supply and can’t be straight away connected to the lamp.
Specifications:
Model: MC-38
Contact Type: NC
Maximum Sensor Sensitivity: 10-20mm
Load Current: 100mA
Withstand Voltage: DC 0-36V
Working Voltage: DC 0-24V
Mounting Hole Distance: 18mm / 0.71inch
Size(Approx.):
27 x 14 x 8mm / 1.06 x 0.55 x 0.31inch (L*W*H)
Each Wire Length(Approx.): 30cm / 11.8inch
Wire Type: 1007#/24#320mmUL
Housing Material: ABS
Package Content:
5pcs x Magnetic Door Switch
20pcs x Mounting Screws
MATERIAL – The switch housing is made of ABS flame retardant material and the reed switch is resistant to high temperature and deformation.
NORMALLY CLOSED(NC) – When the switch is with reference to the magnet, the circuit is conductive(light on); when the switch is separated from the magnet, the circuit isn’t conductive(light off).
ACTUATION DISTANCE – 10-20mm transmitting distance. The contact has fast reflection and accurate detection.
WORKING CONDITIONS – When the magnetic door is energized, the voltage is controlled at DC 0V-24V and the load current can not exceed 100mA.
WIDE APPLICATIONS – Work with all get entry to keep watch over and burglar alarm systems. May also be installed in wooden or aluminum alloy doors and windows.
Specification: Magnetic Reed Switch NC Surface Mount Wired Door Window Contact Sensor with Adhesive Paper for Home Security and Burglar Alarm Systems MC-38 5pcs
|
There are no reviews yet.