Seco-Larm SK-1323-SDQ Enforcer Sealed Housing Weatherproof Stand-Alone Digital Access Keypad; 12-24 VAC/VDC Operation; 2 Multi-Colored Status LEDs; Backlit Keys; 2 Egress Inputs, 1 Door Sensor Input

Seco-Larm SK-1323-SDQ Enforcer Sealed Housing Weatherproof Stand-On my own Digital Get entry to Keypad; 12-24 VAC/VDC Operation; 2 Multi-colored Status LEDs; Backlit Keys; 2 Egress Inputs, 1 Door Sensor Input

Key Features:
– 12 – 24 VAC/VDC operation
– 1,010 Users (Output #1: 1000 users, Output #2: 10 users)
– 2 Form C relays, Every rated 1 Amp @ 30VDC
– Every relay has programmable output time from 1~99 seconds or toggle
– Output #2 may also be programmed to be used with a doorbell
– 2 Egress inputs and 1 door sensor input
– Backlit keys for simple midnight use
– Two multi-colored status LEDs
– In a position to mount to a single-gang back box
– All features are programmed straight away from the keypad, no need for an external programmer
– EEPROM memory protects programmed information in case of power loss
– Optical tamper for added security
– Circuitry is potted with epoxy for out of doors use
– IP65 Weatherproof rating, rugged aluminum construction

Specifications:
– Number of User Codes: Up to 1010
– Operating Voltage: 12~24 VAC/VDC
– Current Draw – Standby: 64mA@12VDC
– Current Draw – Active: 92~120mA@12VDC
– Relay Outputs (2): 1A@30VDC, Form C, NO/COM/NC
– IP Rating: Weatherproof IP65
– Egress Inputs: 2, N.O. Ground
– Door Sensor Input: N.C. Ground
– Tamper Sensor: Optical
– Keypad LED Life: 60,000 hours (over 6.8 years)
– Overall Dimensions: 4.72 x 2.99 x 0.86 inches
– Weight: 1.12 pounds

12 – 24 VAC/VDC operation
1,010 Users (Output #1: 1000 users, Output #2: 10 users)
2 Form C relays, Every rated 1 Amp @ 30VDC
Every relay has programmable output time from 1~99 seconds or toggle
Output #2 may also be programmed to be used with a doorbell
2 Egress inputs and 1 door sensor input
Backlit keys for simple midnight use
Two multi-colored status LEDs
In a position to mount to a single-gang back box
All features are programmed straight away from the keypad, no need for an external programmer