COB LED Strip Light Warm White 3000K, 32.8ft Dimmable Bright 24V Led Tape Light with RF Remote, Indoor COB Led Lights for Bedroom Kitchen Under Cabinet DIY Lighting, 1 Rolls of 32.8ft

Ultra Bright Uniform light: Came with 1 Rolls of 32.8ft/3240 pcs diodes and the width is 8mm. The COB rope light with 3240 high-quality LEDs(324LEDs/m) and 3000K color temperature. The diodes cover yellow odorless and protected silicone material makes light strips more uniform and bright, not shine your eye. The ultra-long continuous length of 32.8 feet/10 meters can satisfy you to decorate large spaces!
Dimmable & Multifunctional: Comes with RF Remote and controller(receiver), it has memory function. 3 timing functions (10min/30min/60min) can make the strip light to turn off at the set time. brightness increase/decrease (6 levels) and 4-fixed brightness levels (10%/25%/50%/100%)，3 modes (jump, gradient, flicker). Note: Before the use of the remote regulate, the insulation at the end will have to be removed.
Easy to DIY: Flexible and cuttable COB light strip can be bent at any angle and thus adapt to your devices to a large extent. The cutting functions give you great flexibility to achieve the length and shape you need. The middle of the metal point on the strip light is a cutting mark (one cutting unit every 50mm/1.97 inches), and the cut strip light can also be reconnected, which is very convenient for DIY! The strip light is 8mm (0.32 inches) wide, allowing you to fit it into very tight places!
Easy Installation & Widely Use: Very Simple installation. Just connect the parts and install to where you need. Flexible COB light strip with strong adhesive tape makes it easy to stick on clean, dry surface, also you’ll be able to install it with screws (included). These COB LED strip lights is ideal for high-end business clubs, kitchen counters, vanity mirrors, dressing tables, closets, display case, bookshelves, wine racks, stairs, living room and other places that need decoration.
All in One Kit: Includes 32.8ft warm white cob strip, RF remote regulate, controller, FCC Listed DC 24V 24W power supply, 2 pin 8mm COB LED connectors, 2 pin 8mm COB LED connector extension wire, mounting brackets. You don’t wish to spend extra time and money buying other accessories.
Tips: The red & black wires at the end of the strip can be bring to an end if you don’t wish to connect more strips. The red & black wire at the end of the strip is convenient so that you can connect the DC connector included in the package so as to power at both ends when you add longer strips in the kit! The 24W power supply in the kit is just enough for the strip light in the kit use. You will have to replace it with a higher output 24V power supply if the total length of the strip light exceeds 32.8ft.