Magnetic Reed Switch RC-36 NC Recessed Wired Window Door Contact Sensor for Home Security and Burglar Alarm Systems 10 Pcs

NORMALLY CLOSED

When the switch is just about the magnet, the circuit is conductive(light on); when the switch is separated from the magnet, the circuit isn’t conductive(light off).

WIDE APPLICAIONS

Work with all get entry to keep watch over and burglar alarm systems. May also be installed in wooden or aluminum alloy doors and windows.

PLEASE NOTE

A magnetic door contact can only provide a switching signal to the device. It can’t right away load the power supply and can’t be right away connected to the lamp.

Specifications:

Model: RC-36

Contact Type: NC(In most cases Closed)

Max. Sensor Sensitivity: 10mm(+/-5mm)

Max. Current: 150mA

Max. Voltage: 100V

Working Voltage: DC0-24V

Max. Contact Power: 10W

Size(Approx.): 25 x 23.6mm / 0.98 x 0.93inch (H*D)

Cable Length(Every): 30cm / 11.8inch

Housing Material: ABS

Wire Type: 1007#/24#300mmUL

Package Content:

5 x Magnetic Door Switch

MATERIAL – The switch housing is made of ABS flame retardant material and reed switch, is resistant to high temperature and deformation.
NORMALLY CLOSED(NC) – When the switch is just about the magnet, the circuit is conductive(light on); when the switch is separated from the magnet, the circuit isn’t conductive(light off).
ACTUATION DISTANCE – 10mm transmitting distance. The contact has fast reflection and accurate detection.
WORKING CONDITIONS – When the magnetic door is energized, the voltage is controlled at DC 0V-24V and the supply current can’t exceed 1A. The load current is 150mA.
WIDE APPLICATIONS – Work with all get entry to keep watch over and burglar alarm systems. May also be installed in wooden or aluminum alloy doors and windows.