WWZMDiB 3Pcs GY-MAX4466 Sound Sensor, Electret Microphone Amplifier, Microphone Tunable Amplifier Module

WWZMDiB 3Pcs GY-MAX4466 Sound Sensor, Electret Microphone Amplifier, Microphone Tunable Amplifier Module

💎【MAX4466 Sound Sensor】：The module incorporates ferrite on both Vcc and ground ends up in minimize power supply noise. If used with an MCU, it’s best to make use of the quietest power supply to be had in the 2.4V – 5.5V range. At the Arduino, that is normally a 3.3V supply.
⚡【Supply voltage】: +2.4V to +5.5V (can also be straight away connected to STM/ARDUNIO/Raspberry Pi development boards)
⚡【Power supply rejection ratio】：112dB
⚡【Common mode rejection ratio】：126dB
⚡【AVOL】： 125dB (RL = 100kΩ) Rail-to-rail output
⚡【Static supply current】：24μA
⚡【Gain bandwidth】：600kHz

💎【Package included】:
🥇3Pcs GY-MAX4466 Sound Sensor
🥈10Pin 21cm/8 in Male to Female Jumper Wires.
🥉10Pin 21cm/8 in Female to Female Jumper Wires.

💎【MAX4466 Sound Sensor】：The module incorporates ferrite on both Vcc and ground ends up in minimize power supply noise. If used with an MCU, it’s best to make use of the quietest power supply to be had in the 2.4V – 5.5V range. At the Arduino, that is normally a 3.3V supply.
⚡【Supply voltage】: +2.4V to +5.5V (can also be straight away connected to STM/ARDUNIO/Raspberry Pi development boards)
⚡【Power supply rejection ratio】：112dB
⚡【Common mode rejection ratio】：126dB
⚡【AVOL】： 125dB (RL = 100kΩ) Rail-to-rail output
⚡【Static supply current】：24μA
⚡【Gain bandwidth】：600kHz