Orbit 1 inch x 2″ PVC Sprinkler Riser for Sprinkler System

Riser pipes in rigid PVC let you connect from a sprinkler line, normally under the ground, to a hose faucet, drip manifold, shrub head, spray head, have an effect on sprinkler, or gear-drive rotor. The wall thickness of PVC risers is thicker than Schedule 40 pipe because of this it has greater rigidity and pressure rating. As plants grow you’ll be able to extend the riser above the plants by means of addition of a Schedule 40 PVC coupling and some other riser. Use a make stronger stake to stabilize taller risers. Riser inlet/outlet sizes for residential applications are 1/2-inch, 3/4-inch, and 1-inch male pipe thread (MPT), with lengths spanning from just the pipe threads (“close nipple”) to 48 inches. Compatible with irrigation components from Orbit, Hydro-Rain, and other major brands. For out of doors irrigation use with cold water only.

For connecting a hose bib, drip manifold, shrub head, spray head, have an effect on sprinkler, or gear-drive rotor to a sprinkler line
UV-resistant PVC construction suitable for mainline and lateral line use
Male pipe thread (MPT) ends can also be joined with couplings to create taller risers for shrub areas
Compatible with equipment from Orbit, Hydro-Rain, and other major brands